Differences

This shows you the differences between two versions of the page.

Link to this comparison view

--- clubs:3d-printing:3d_printing_project_benchy_boat [2025/09/13 07:12] – [Project - Benchy Boat] garfield
+++ clubs:3d-printing:3d_printing_project_benchy_boat [2025/09/13 23:15] (current) – [Project - Benchy Boat] garfield
@@ Line 7: / Line 7: @@
 ==== Project - Benchy Boat ====
+{{:clubs:3d-printing:3dbenchy_display_large.webp?250 }} {{clubs:3d-printing:benchy.webp?250: }} \\
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+\\
 This is a typical first project for many people. It's a small, simple model that is ready to print.
@@ Line 19: / Line 30: @@
 You now have a model in your project. Let's give the project a name. At the top left corner ( next to the colorful square ), you will see a random 2-word name. Click on the name to erase it and give it a new name.
-Let's call this project **Benchy**.
+Let's call this project **Benchy Boat**. Then press enter to save the name.
+== Add Your Initials ==
+  - Select the text tool on the right and click somewhere on the build plane.
+  - Change the color to white ( preset )
+  - Change the text from "TEXT" to your initials ( eg. MD )
+  - Reduce the size to somewhat smaller than the boat roof
+  - Rotate it to sit flat on the roof. The height needs to be enough to be half inside the roof and half sticking out of it.
+{{:clubs:3d-printing:benchy_with_intitials_-_2025-09-13.png}}
+Your model should look like this. If so, you are ready to prepare for printing.
+Go to [[clubs:3d-printing:3d_printing_editing#editing|the editing page]] to prepare your model.